EPA’s First-Round of Test Method Development Research
PlasmaGuard PRO™ achieved 99% total airborne neutralization of non-enveloped RNA Virus MS2 in 60 minutes and 86% vs. ventilation alone.
SARS-CoV-2 (COVID-19) Airborne Neutralization Test
The PlasmaGuard PRO™ system, powered by PuriFi Labs, demonstrated a 97.51% total reduction of airborne SARS-CoV-2 in just 29 minutes.
EPA’s First-Round of Test Method Development Research
PlasmaGuard PRO™ Technology tested by the EPA’s Homeland Security Research Division under highly rigorous HVAC mechanical conditions.
SARS-CoV-2 (COVID-19) Surface Neutralization Test
The PlasmaGuard PRO™ system, powered by PuriFi Labs, provided statistically consistent viral inactivation performance throughout the neutralization test.
SARS-CoV-2 Airborne Neutralization Test
PlasmaGuard PRO™ Technology neutralizes tested envelope virus SARS-CoV-2 in real-world conditions for central HVAC systems.
UL Ozone Test- 1500 CFM
Test results show the PlasmaGuard PRO™ reduced the ambient ozone from 12 ppb to 8 ppb after 8 hours of operation @ 1500 CFM.
SARS-CoV-2 Delta Variant Airborne Neutralization Test
Under real-world test conditions, PlasmaGuard PRO technology tested airborne SARS-CoV-2 B.1.617.2 (Delta) Variant
SARS-CoV-2 Delta Variant Airborne Neutralization Test
The PlasmaGuard PRO demonstrated a 95% total airborne reduction of SARS-CoV-2 B.1.617.2 (Delta) Variant in 29 minutes, with a progressive reduction of 99.999% in 59 minutes.
Coronavirus Aerosol Surrogate Neutralization Test
The testing, shown on page 10 in paragraph 2, represents two different test results. The first test in the graph introduces the surrogate virus into the room and turns on the IONaer 7000 (PuriFi) at the same time, resulting in a 99.82% reduction in 33 minutes. The second test allowed the IONaer 7000 (PuriFi) to run for 10 minutes, then introduced the virus into the room, resulting in a 99.994% reduction within 10 minutes.
EPA Designed Aerobiology Chamber for Coronavirus Surrogates
The document indicates the size of the room in which the tests were performed. The size would be equal to a typical hospital room.
University of Arizona Efficacy Testing on Pathogens and Microbials
Depicts the results on E. coli, A. baummanii (mold), S. aureus (Staph), and non-enveloped viral surrogate Norovirus MS2.
Particulate Decay Rates and Agglomeration
Test results show an increase of decay rates, 260% faster, after installing IONaer 7000 (PlasmaGuard PRO).
Sample Charts of PlasmaGuard PM Sensor Data & Trending
Graphs of the live data illustrate the speed of particulate reduction in homes or businesses when the sensor sends the signal to activate the IONaer 7000 (PlasmaGuard PRO). Customers can access this data in real-time through the PlasmaGuard™ App.
UL Ozone Test- 300 CFM
Test results show the IONaer 7000 (PlasmaGuard PRO) reduced the ambient ozone from 15 ppb to 5 ppb after 8 hours of operation @ 300 CFM.
UL Test Apparatus
Diagram illustrates the testing rig Underwriters Laboratories (UL) used for testing.
UL 2043 Test Report
The tests were conducted in accordance with the test procedure described in UL Standard 2043, Fourth Edition, dated October 2, 2013. ("Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces"), dated October 02, 2013.
FCC Compliance Testing
These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15. All tests were conducted using measurement procedure from ANSI ANSI C.63.4 2014 as appropriate.
UL Listing Report
This equipment has been investigated from the standpoint of electrical, fire and casualty hazards only. Physiological nor health effects, beneficial or otherwise associated with the use of this product and its ability to aid in disinfection of environmental air have not been investigated by UL.
CE Listing Report
The PlasmaGuard PRO air purification system was tested according to the directive and standards listed. The equipment was found to be COMPLIANT with the applicable requirements.